Rapid Determination of Cellulose, Hemicellulose and Lignin Content in Hemp Fibers Using Near-Infrared Spectroscopy 


Vol. 26,  No. 2, pp. 547-557, Feb.  2025
10.1007/s12221-024-00834-8


PDF
  Abstract

Currently, the wet-chemical analysis method is primarily used to detect the components of hemp fiber. However, this method is time-consuming and not environmentally friendly. This paper presents a study on the detection of the main components of hemp using near-infrared (NIR) spectroscopy and their determination through wet chemical analysis. The relationship between chemical analysis data and NIR spectral data was established using the partial least squares (PLS) and principal component regression (PCR) methods. Based on the corrected and predicted root mean square error (RMSE) and mean absolute error (MAE), it can be concluded that PCR is a more effective quantitative method than PLS. The constructed main component regression prediction models for cellulose, hemicellulose, and lignin had RMSE values of 2.24%, 0.83%, and 1.87%, respectively, while their MAE values were 5.89%, 8.21%, and 2.24%. These results indicate good stability. Optimizing the spectral wavelength range improved the modeling quality of the PCR prediction model for cellulose, hemicellulose, and lignin. The spectral wavelength range for cellulose was 1600–2400 nm, with RMSE and MAE of 3.78% and 3.88%, respectively. The spectral wavelength range for hemicellulose was 1400–2400 nm, with RMSE and MAE of 1.37% and 14.56%, respectively. The spectral wavelength range for lignin was between 1200 and 2400 nm, with RMSE and MAE of 3.03% and 17.79%, respectively. These results demonstrate that the NIR model offers a quick and straightforward approach to detecting components in hemp fiber, which is beneficial for evaluating its quality.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

L. Wang, C. Lu, J. Wang, C. Wang, C. Li, "Rapid Determination of Cellulose, Hemicellulose and Lignin Content in Hemp Fibers Using Near-Infrared Spectroscopy," Fibers and Polymers, vol. 26, no. 2, pp. 547-557, 2025. DOI: 10.1007/s12221-024-00834-8.

[ACM Style]

Lijian Wang, Chao Lu, Jiangang Wang, Chunhong Wang, and Cuiyu Li. 2025. Rapid Determination of Cellulose, Hemicellulose and Lignin Content in Hemp Fibers Using Near-Infrared Spectroscopy. Fibers and Polymers, 26, 2, (2025), 547-557. DOI: 10.1007/s12221-024-00834-8.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2024): 2.3