SF6 Plasma Surface Modification of Flax Fibers for Improved Adhesion in Polypropylene Composites 


Vol. 26,  No. 6, pp. 2569-2579, Jun.  2025
10.1007/s12221-025-00949-6


PDF
  Abstract

Flax fibers have attracted growing interest in the automotive industry as an eco-friendly reinforcement for polymer composites. However, their limited interfacial compatibility with hydrophobic matrices is detrimental to adhesion, a key factor in the composite mechanical behavior. To address this issue, this study investigates the surface modification of flax fibers using sulfur hexafluoride (SF6) plasma. The proposed treatment promotes fiber surface hydrophobization while preserving their bulk properties. The effect of SF6 plasma treatments on flax fiber adhesion to polypropylene (PP) blends containing post-consumer material is thoroughly examined. The analysis, conducted using scanning electron microscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, and infrared spectroscopy, reveals that the plasma treatment induces the etching of amorphous substances present in the fibers, including amorphous cellulose, hemicelluloses, and lignin. Plasma etching in combination with fluorination significantly enhances the adhesion of flax fibers to the PP blend matrix. Notably, the treated fibers exhibit improvements in tensile strength (9%) and elastic modulus (25%) compared to untreated fibers. These findings highlight the potential of SF6 plasmas as an effective pretreatment method for natural fiber composite reinforcements.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

A. T. V. Veiga, Y. F. d. Silva, R. C. Cavalcante, R. A. Simão, "SF6 Plasma Surface Modification of Flax Fibers for Improved Adhesion in Polypropylene Composites," Fibers and Polymers, vol. 26, no. 6, pp. 2569-2579, 2025. DOI: 10.1007/s12221-025-00949-6.

[ACM Style]

Anderson Thiago Vasconcelos Veiga, Yuri Ferreira da Silva, Rafael Cordeiro Cavalcante, and Renata Antoun Simão. 2025. SF6 Plasma Surface Modification of Flax Fibers for Improved Adhesion in Polypropylene Composites. Fibers and Polymers, 26, 6, (2025), 2569-2579. DOI: 10.1007/s12221-025-00949-6.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5