Property Enhancement of Direct-Spun Carbon Nanotube Fibers via Polyethylene Glycol Infiltration 


Vol. 26,  No. 9, pp. 3911-3918, Sep.  2025
10.1007/s12221-025-01080-2


PDF
  Abstract

Carbon nanotube (CNT) fiber is a promising material for various applications, such as wearable devices, energy harvesting, energy storage, and artificial muscles. The floating catalyst chemical vapor deposition (FCCVD) method allows mass production of CNT fibers. However, the mechanical and electrical properties of the CNTs fabricated using the FCCVD method are inferior to those of the CNT fibers fabricated using other methods, such as wet spinning and spinnable CNT forests. Therefore, suitable methods are required to improve the mechanical properties and electrical conductivity of CNT fibers obtained using the FCCVD method. One strategy is infiltration of a polymer into the CNT fiber. In this study, polyethylene glycol was infiltrated into pristine CNT fibers and formed hydrogen bonds with the oxygen present on surface of CNTs from FCCVD method. Solvent evaporation resulted in the formation of dense CNT fibers, which featured more connections among the CNTs. The polymer-incorporated CNT fiber exhibited high toughness, ultimate strength, and electrical conductivity and can thus be employed in various real-life applications.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

J. G. Choi, J. W. Park, T. Li, J. H. Ahn, Y. Jeong, S. J. Kim, "Property Enhancement of Direct-Spun Carbon Nanotube Fibers via Polyethylene Glycol Infiltration," Fibers and Polymers, vol. 26, no. 9, pp. 3911-3918, 2025. DOI: 10.1007/s12221-025-01080-2.

[ACM Style]

Jung Gi Choi, Jong Woo Park, Tao Li, Ji Hoon Ahn, Youngjin Jeong, and Seon Jeong Kim. 2025. Property Enhancement of Direct-Spun Carbon Nanotube Fibers via Polyethylene Glycol Infiltration. Fibers and Polymers, 26, 9, (2025), 3911-3918. DOI: 10.1007/s12221-025-01080-2.