Effect of the Polycarbonate-to-polypropylene Ratio on the Pressure Drop and Filtration Efficiency of a Melt-blown Nonwoven 


Vol. 27,  No. 4, pp. 1679-1687, Apr.  2026
10.1007/s12221-026-01325-8


PDF
  Abstract

The quality factor (QF) of an air filter depends on the pressure drop and filtration efficiency. In this study, mixing thick polycarbonate (PC) fibers into a polypropylene (PP) melt-blown (MB) nonwoven improved the QF. We investigated how the PC fiber diameter affected QF. A series of MB nonwoven samples were prepared by changing the PC throughput rate (L) from 0 to 90 cm3/min, while maintaining a constant PP throughput rate. We used X-ray computed tomography to evaluate the nonwoven characteristics, i.e., the thickness, fiber diameter, fiber orientation, and fiber volume fraction. We used these characteristics to determine the relationship between the nonwoven structure and QF. The PC fiber diameter increased with L, and the initial nonwoven thickness increased linearly with the PC fiber diameter. However, loading at 0.5 and 50 kPa considerably decreased the nonwoven thickness for all L values except the maximum L. The enhanced QF for samples prepared using L values of 15–52.5 cm3/min resulted from a decrease in the pressure drop caused by the incorporation of thick fibers, as has been previously reported. The further enhancement of QF for the sample produced using the maximum L of 90 cm3/min was attributed to the uniform fiber volume fraction and fiber orientation in the thickness direction of this sample (the fiber orientation factor increased slightly in the thickness direction).

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

Y. Shibata, R. Tomisawa, K. Kim, M. Sato, E. Meguro, "Effect of the Polycarbonate-to-polypropylene Ratio on the Pressure Drop and Filtration Efficiency of a Melt-blown Nonwoven," Fibers and Polymers, vol. 27, no. 4, pp. 1679-1687, 2026. DOI: 10.1007/s12221-026-01325-8.

[ACM Style]

Yuji Shibata, Ren Tomisawa, KyoungHou Kim, Masashi Sato, and Eiko Meguro. 2026. Effect of the Polycarbonate-to-polypropylene Ratio on the Pressure Drop and Filtration Efficiency of a Melt-blown Nonwoven. Fibers and Polymers, 27, 4, (2026), 1679-1687. DOI: 10.1007/s12221-026-01325-8.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2024): 2.3