Strain Sensors Based on Electroless Ni-P Plated Polyester Woven Fabrics 


Vol. 20,  No. 3, pp. 562-568, Mar.  2019
10.1007/s12221-019-8946-4


PDF
  Abstract

In this study, polyester and polyester/spandex woven fabrics were electroless Ni-P plated at different conditions. The physical and electrical properties of Ni-P coated fabrics were investigated by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), wide angle X-ray scattering (WAXS), tensile tests, and air permeability, hydrophobicity and cyclic electro-mechanical measurements (strain sensor evaluation). SEM, WAXS and EDX results revealed the existence of an amorphous layer consisting of Ni and phosphorous atoms on the surface of the fabrics. Besides, the coated fabrics became more hydrophobic than the raw fabrics and the air permeability of them was also decreased. The electroless plated polyester fabrics showed some regular variation of resistance versus time during cyclic loading under 25 % strain, with very distinct maximums and minimums in the resistance/time curves. This trend was not observed for polyester/ spandex coated fabrics due to its mechanism of deformation under strain. As a conclusion, the polyester Ni-P electroless plated fabrics could be considered as strain fabric sensors that might be applied in smart textiles.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

M. Youssefi, E. Fanaei, M. Shanbeh, "Strain Sensors Based on Electroless Ni-P Plated Polyester Woven Fabrics," Fibers and Polymers, vol. 20, no. 3, pp. 562-568, 2019. DOI: 10.1007/s12221-019-8946-4.

[ACM Style]

Mostafa Youssefi, Elaheh Fanaei, and Mohsen Shanbeh. 2019. Strain Sensors Based on Electroless Ni-P Plated Polyester Woven Fabrics. Fibers and Polymers, 20, 3, (2019), 562-568. DOI: 10.1007/s12221-019-8946-4.