The Preparation and Characterization of an Epoxy Polyurethane Hybrid Polymer Using Bisphenol A and Epichlorohydrin 


Vol. 21,  No. 3, pp. 447-455, Mar.  2020
10.1007/s12221-020-1239-0


PDF
  Abstract

Epoxy polymers composed of bisphenol A (BPA) and epichlorohydrin (ECH) were grafted onto polyurethane (PU) using the graft-polymerization method to prepare the epoxy PU hybrid polymer. The main series contained the epoxy polymer grafted onto PU; however, the epoxy polymer was not bound to PU in the control series. The breaking tensile stress steeply increased at low BPA and ECH contents and then decreased as more BPA and ECH were included in the main series, whereas the control series did not display an incline in the breaking tensile stress irrespective of the BPA and ECH contents. The percent shape recovery also steeply increased after the grafting of epoxy polymer in the main series but increased at a slower rate in the control series. The flexibility of the main series at a freezing temperature was not enhanced compared with the plain PU because the grafted epoxy polymers did not effectively disrupt the molecular interaction between PUs. Therefore, the grafting of epoxy polymers noticeably enhanced the breaking tensile strength and percent shape recovery of PU.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

Y. Chung, J. C. Bae, J. W. Choi, B. C. Chun, "The Preparation and Characterization of an Epoxy Polyurethane Hybrid Polymer Using Bisphenol A and Epichlorohydrin," Fibers and Polymers, vol. 21, no. 3, pp. 447-455, 2020. DOI: 10.1007/s12221-020-1239-0.

[ACM Style]

Yong-Chan Chung, Jin Cheol Bae, Jae Won Choi, and Byoung Chul Chun. 2020. The Preparation and Characterization of an Epoxy Polyurethane Hybrid Polymer Using Bisphenol A and Epichlorohydrin. Fibers and Polymers, 21, 3, (2020), 447-455. DOI: 10.1007/s12221-020-1239-0.