Performance of Kenaf Non-woven Mat/PLA Biocomposites under Medium Velocity Impact 


Vol. 21,  No. 11, pp. 2642-2651, Nov.  2020
10.1007/s12221-020-1130-z


PDF
  Abstract

Focus on biofibre-reinforced biopolymer composites as sustainable alternatives to non-biodegradable composites in high-performance applications is increasing. This work focused on characterising the performance of kenaf non-woven mat/PLA biocomposites under medium velocity impact loads. Biocomposite laminates of different fibre contents were fabricated and then analysed for their resistance to medium velocity impact on a high speed gas gun. The perforation threshold limit was determined and impact-induced damages analysed using non-destructive techniques. Results showed that kenaf non-woven mat/PLA biocomposites have a perforation threshold limit of 26 m/s and doubling of fibre content improved the perforation threshold limit by 42.3 %. The impact damage resistance of kenaf non-woven mat/PLA biocomposites increased by 27.6 % when fibre content was doubled. The failure modes resembled that of some conventional fibre-reinforced composites. It was concluded that kenaf non-woven mat/PLA biocomposites have a potential to cushion against medium velocity impacts and hence could be good replacements for the non-biodegradable composites used for cushioning against secondary debris in the medium velocity range.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

M. Moyo, K. Kanny, R. Velmurugan, "Performance of Kenaf Non-woven Mat/PLA Biocomposites under Medium Velocity Impact," Fibers and Polymers, vol. 21, no. 11, pp. 2642-2651, 2020. DOI: 10.1007/s12221-020-1130-z.

[ACM Style]

Mufaro Moyo, Krishnan Kanny, and Raman Velmurugan. 2020. Performance of Kenaf Non-woven Mat/PLA Biocomposites under Medium Velocity Impact. Fibers and Polymers, 21, 11, (2020), 2642-2651. DOI: 10.1007/s12221-020-1130-z.