Color Changes in Some UV Irradiated Polymer Nanocomposite Materials for the Application in Textile Industry 


Vol. 22,  No. 6, pp. 1711-1717, Jun.  2021
10.1007/s12221-021-0871-7


PDF
  Abstract

Four nanocomposites (NCPs), e.g., polyaniline-copper/polymethyl methacrylate (PANI-Cu/PMMA), polyanilinecopper/ cellulose triacetate (PANI-Cu/CTA), polyaniline-copper/polycarbonate (PANI-Cu/PC), and polyaniline-copper/ polycarbonate-polyester (PANI-Cu/PC-PBT) were fabricated using both chemical oxidation and casting techniques. The morphology of the prepared NCPs was studied using scanning electron microscopy. The induced alterations in the color of the synthesized NCPs owing to UV irradiation, within fluences 25-120 J/cm2, have been illustrated via UV spectroscopy and CIE color divergence methodology. The color variation between the pristine and irradiated NCP samples (color intensity, E) has been computed for the four NCPs. The results show that, upon UV irradiation up to 120 J/cm2, the values of E for the PANI-Cu/PMMA NCP samples achieved a major color difference which is an acceptable match in commercial reproduction on printing presses since E reached the value of 35.8. The value of E for the PANI-Cu/CTA NCP samples reached 23.8 that also indicates a significant color difference. It is worth mentioning that the PANI-Cu/PC-PBT shows a minimum color difference since E exhibited variation up to 7. This means that the PANI-Cu/PC-PBT NCP samples have higher resistance to color changes against UV radiation. Thus, this NCP may be a suitable candidate in textile industry.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

C. C. i. S. U. I. P. N. M. f. t. A. i. T. Industry, "Color Changes in Some UV Irradiated Polymer Nanocomposite Materials for the Application in Textile Industry," Fibers and Polymers, vol. 22, no. 6, pp. 1711-1717, 2021. DOI: 10.1007/s12221-021-0871-7.

[ACM Style]

Color Changes in Some UV Irradiated Polymer Nanocomposite Materials for the Application in Textile Industry. 2021. Color Changes in Some UV Irradiated Polymer Nanocomposite Materials for the Application in Textile Industry. Fibers and Polymers, 22, 6, (2021), 1711-1717. DOI: 10.1007/s12221-021-0871-7.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5