Vol. 24, No. 10, pp. 3393-3403,
Oct. 2023
10.1007/s12221-023-00323-4
PDF
Abstract
Color change technology offers unique and challenging opportunities. Thermo-responsive color-changing nanofibers with reversibility have great potential as thermal sensors due to their increased sensitivity and fast response. Herein, polycaprolactone (PCL) nanofibers were produced by adding a leuco-based thermochromic dye with various concentrations (1%, 3%, and 5% wt corresponding to PCL1, PCL3, and PCL5, respectively). The color-changing properties with repetitive heating and cooling were studied, and the effect of dye concentration on the nanofiber properties was determined. The surface properties, dye presence, thermal and mechanical properties were analyzed by SEM-EDS, FTIR, DSC, and tensile tests. Finally, the color change properties were monitored by 1000 heating and cooling cycles between 20 and 40 °C. Thermochromic PCL nanofibers were successfully produced by electrospinning. However, some agglomerates were observed on the nanofibers with increasing dye concentration in SEM images. It was seen that the optimum dye concentration was 3% in terms of the electrospinnability. For PCL5, both presence of carbon, oxygen, nitrogen, and fluorine in EDS spectra, the shifted peaks at 2917 and 2849 cm-1, and the new peaks at 1558, 1517, 1330, 1274, 1213 and 883 cm-1 in FTIR spectra confirmed that dye had been successfully incorporated into the PCL structure. The dye addition caused a decrease in the crystallization degrees, which resulted in lower mechanical properties. PCL5 had the lowest modulus. Color measurements showed that 1% of dyes concentration was not sufficient for the thermochromic property, and the color change was still visually detectable for PCL3 and PCL5 even after 1000 heating and cooling cycles. Color change activation temperature (TA) was confirmed between 30 and 32 °C, and the stability of color change was confirmed for 1000 heating and cooling cycles. After 1000 heating and cooling cycles, the color change was still detectable for PCL3 and PCL5. Consequently, this study showed that reversible thermochromic PCL nanofibers could be promising materials for future sensor applications.
Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.
Cite this article
[IEEE Style]
S. D. Gebizli, N. Guclu, M. Tiritoglu, S. Tezel, M. Orhan, "Reversible Thermochromic Polycaprolactone Nanofibers for Repetitive Usage," Fibers and Polymers, vol. 24, no. 10, pp. 3393-3403, 2023. DOI: 10.1007/s12221-023-00323-4.
[ACM Style]
Sebnem Duzyer Gebizli, Nihal Guclu, Mehmet Tiritoglu, Serkan Tezel, and Mehmet Orhan. 2023. Reversible Thermochromic Polycaprolactone Nanofibers for Repetitive Usage. Fibers and Polymers, 24, 10, (2023), 3393-3403. DOI: 10.1007/s12221-023-00323-4.