Preparation and Characterization of Electrospun Mat of Ultra-high Molecular Weight Polyethylene/High-Density Polyethylene Blends 


Vol. 24,  No. 10, pp. 3421-3433, Oct.  2023
10.1007/s12221-023-00286-6


PDF
  Abstract

Ultra-high molecular weight polyethylene (UHMWPE) acquires excellent properties while possessing poor processability. Blending low molecular weight polyethylene disentangles the molecular chain of UHMWPE and improves its processability, improving fiber productivity. In the present study, UHMWPE and its HDPE-blended fibers were produced by a high-temperature electrospinning process, and the effect of HDPE content on fiber properties was investigated in depth. Analysis of fiber surface morphology revealed the formation of uniformly distributed nano- to microscopic pores/pits, wrinkles, and grooves on the surface of blended fibers, unlike neat UHMWPE fibers containing irregular surface bulges and pits. It suggested that the blending of HDPE affected the surface topography and the thermal and mechanical properties of electrospun fibers. The tensile strength and Young’s modulus of UHMWPE fiber improved by 142 and 102% at a 67:33 mass ratio of UHMWPE and HDPE and by 84 and 132% in the case of a 50:50 composition ratio, respectively.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

P. Nayak, A. K. Ghosh, N. Bhatnagar, "Preparation and Characterization of Electrospun Mat of Ultra-high Molecular Weight Polyethylene/High-Density Polyethylene Blends," Fibers and Polymers, vol. 24, no. 10, pp. 3421-3433, 2023. DOI: 10.1007/s12221-023-00286-6.

[ACM Style]

Prajesh Nayak, Anup K. Ghosh, and Naresh Bhatnagar. 2023. Preparation and Characterization of Electrospun Mat of Ultra-high Molecular Weight Polyethylene/High-Density Polyethylene Blends. Fibers and Polymers, 24, 10, (2023), 3421-3433. DOI: 10.1007/s12221-023-00286-6.