Effect of Various Surface Treatments Applied on Glass Fiber Post and Universal Adhesives on Microtensile Bond Strength and Investigation of Surface Properties with EDX 


Vol. 24,  No. 10, pp. 3689-3698, Oct.  2023
10.1007/s12221-023-00315-4


PDF
  Abstract

The purpose of this study is to investigate the effects of various surface treatments and universal adhesives on the changes in the glass fiber posts (GFPs) surface and the bond strength between resin cement-post and core composite-post. A total of 20 groups (n = 16) were formed, 10 groups for resin cement and 10 groups for core composite. Various surface treatments, including acid etching and silane application, and two different universal adhesives (Single bond Universal, All Bond Universal) were applied. After various surface treatments and adhesives were applied to the GFPs surface, the surface properties were examined by energy-dispersive X-ray spectroscopy (EDX) analysis. Standard silicone molds were prepared to bond the resin cement and core composite with the GFPs. The serial 1 mm thickness bar was taken from each sample. Microtensile bond strength (μTBS) test was performed and failure modes were evaluated by scanning electron microscopy (SEM). Statistical analysis was performed using a two-way analysis of variance and Tukey's post hoc tests (p = 0.05). The bond strength values of the groups that applied 37% orthophosphoric acid (OPA), silane, and universal adhesive to the GFPs surface before the resin cement and core composite were statistically significantly higher than the control group (p < 0.05). In the resin cement study, the group using silane and Single Bond Universal showed higher bond strength than the other groups (p < 0.05). Acid etching and silane application before the use of universal adhesives increased the μTBS in both resin cement and core composite groups.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

S. Ekrikaya, S. Demirbuğa, N. N. C. Kilinc, B. Avci, "Effect of Various Surface Treatments Applied on Glass Fiber Post and Universal Adhesives on Microtensile Bond Strength and Investigation of Surface Properties with EDX," Fibers and Polymers, vol. 24, no. 10, pp. 3689-3698, 2023. DOI: 10.1007/s12221-023-00315-4.

[ACM Style]

Semiha Ekrikaya, Sezer Demirbuğa, Nazire Nurdan Cakir Kilinc, and Burhanettin Avci. 2023. Effect of Various Surface Treatments Applied on Glass Fiber Post and Universal Adhesives on Microtensile Bond Strength and Investigation of Surface Properties with EDX. Fibers and Polymers, 24, 10, (2023), 3689-3698. DOI: 10.1007/s12221-023-00315-4.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5