Development of Non-Contact Penetration Measuring Device for Pile Driving Workers 


Vol. 35,  No. 3, pp. 58-63, Jun.  2020
10.14346/JKOSOS.2020.35.3.58


PDF
  Abstract

At the construction site of the driving site, the pile rebound and penetration measurements are performed manually to determine the end point of the driving operation, thereby causing the measurer to be exposed to a death accident. In this study, in order to eliminate the risk of this work, a non-contact penetration measuring device was developed and usability evaluation was conducted. The penetration measuring device is manufactured based on the ultrasonic sensor, and can be combined with the pile to deliver the data in real time, and the delivered data can be output in real time on the portable PC and the final penetration can be calculated. Usability evaluation on the device was conducted by comparison with manual work. Usability evaluation was largely evaluated on measured values, subjective comfort, and body parts comfort. The result of the measured value tended to overestimate the value measured manually by the measuring device, which is similar to the previous research. In terms of subjective comfort and body part comfort, overall satisfaction was higher than the manual method when using the measuring device. Taken together, these results indicate that it is possible to use the rudder measuring device in place of manual work in the construction site, and it is judged that the worker's comfort is greatly increased by using the measuring machine. The results of this study suggest that the use of non-contact measuring device in the field can be used as basic data to support them

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

김재경, 공용구, 최경희, 조민욱, 김승연, 김민정, 이준협, 박채원, "Development of Non-Contact Penetration Measuring Device for Pile Driving Workers," Journal of the Korean Society of Safety, vol. 35, no. 3, pp. 58-63, 2020. DOI: 10.14346/JKOSOS.2020.35.3.58.

[ACM Style]

김재경, 공용구, 최경희, 조민욱, 김승연, 김민정, 이준협, and 박채원. 2020. Development of Non-Contact Penetration Measuring Device for Pile Driving Workers. Journal of the Korean Society of Safety, 35, 3, (2020), 58-63. DOI: 10.14346/JKOSOS.2020.35.3.58.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5