Journal of the Korean Society of Safety

Experimental Study on Performance Characteristics of High Speed Air Valve for Water Works

이선곤 강세호 양철수 우창기
Vol. 29, No. 5, pp. 1-6, Oct. 2014

A Study on Impact Collapse Modes of Composite Structural Members using Carbon Fiber Reinforced Plastics for Car Body Lightweight

황우채 최영민 임광희 차천석 양용준
양인영
Vol. 29, No. 5, pp. 7-14, Oct. 2014

carbon fiber reinforced plastics

collapse mode

Lightweight

impact characteristics

section shape

The Strain Evaluation of the Notch tip Area for the CFRP/GFRP Hybrid Laminate Plate using the SENT Specimen

강지웅
Vol. 29, No. 5, pp. 15-21, Oct. 2014

blade

CFRP(Carbon Fiber Reinforced Plastic)

Composite

Digital Image Correlation (DIC)

Fatigue

GFRP(Glass Fiber Reinforced Plastic)

Hybrid

SENT(Single Edge Notched Tension)

Wind power

A Study of Response Characteristics for the Interior Impulse Noise based on Interpreted Models

송기혁 정성학
Vol. 29, No. 5, pp. 22-28, Oct. 2014

A Study on the Characteristic of Electrical Construction Work for Prevention of Electric Shock Accident

최상원
Vol. 29, No. 5, pp. 29-34, Oct. 2014

electric shock hazard

live-line work

electrical construction company/work

Analysis of Thermal Characteristic for VCTFK, VFF, HIV and CV Wring by Electric Fan at Livestock Barn

김두현 유상옥 김성철
Vol. 29, No. 5, pp. 35-39, Oct. 2014

Thermal characteristics

mode of load current

Analysis of Vehicle Fire Accident Caused by Defect of Optionally Established Equipment

박남규 김진표 남정우 송재용
Vol. 29, No. 5, pp. 40-46, Oct. 2014

vehicle fire

optionally established equipment

Development of a Novel Real-Time Monitoring System Algorithm for Fire Prevention

김병조 김재호
Vol. 29, No. 5, pp. 47-53, Oct. 2014

A Study on the Malfunction Prevention for Transponder of Record Type Fire Alarm System

유재익 정재희
Vol. 29, No. 5, pp. 54-59, Oct. 2014

the record type receivers

A Study on the Actual Conditions of Safety Management in Thermal Oil System

이주엽 이근원 우인성
Vol. 29, No. 5, pp. 60-66, Oct. 2014

An Experimental Study on the Anchorage Capacity by Diameter and Anchor Type of Re-bar

조성열 손기상
Vol. 29, No. 5, pp. 67-73, Oct. 2014

anchorage

Supporting structure

concrete design strength

x-asis displacement

A Study on the Strength Evaluation of Micropile with Expanded Drill Hole

이재민 김두환
Vol. 29, No. 5, pp. 74-81, Oct. 2014

A Study on Safety Diagnosis for Reconstruction of the Non-Association Apartment

방제돈 오태근
Vol. 29, No. 5, pp. 82-87, Oct. 2014

Reconstruction

safety diagnosis

non-association apartment

A Management Approach of the Construction Accidents Based on Assessing the Job Stress of Korean and Foreign Construction Laborers

정경환 김광희 신윤석
Vol. 29, No. 5, pp. 88-96, Oct. 2014

construction laborers

job stress

construction accident

Accident prevention

Minimum Thickness of Long-Span RC Deck Slabs for 2-girder Bridges Designed by 80 MPa Concrete

배재현 유동민 황훈희 김성태
Vol. 29, No. 5, pp. 97-103, Oct. 2014

minimum thickness

high-strength concrete

long-span bridge deck

limit state design

RC deck

A Study on the Present Condition and Performance Analysis for the Timely Technical Guidance Project

고원경 이영섭 이준원 박종일
Vol. 29, No. 5, pp. 104-109, Oct. 2014

timely technical guidance

Performance Analysis

improvement direction

small and medium sized enterprises

A Study on the Criteria for Appointment of Safety and Health Managers in the Construction Industry

이연수 박용규
Vol. 29, No. 5, pp. 110-115, Oct. 2014

Electrical Impedance Response Model of Concrete in Setting Process

신성우 황가람 이창준
Vol. 29, No. 5, pp. 116-122, Oct. 2014

electric resistance of concrete

impedance response model of concrete

assessment of setting process of concrete

Factors Affecting Posttraumatic Stress in New Firefighter

백미례
Vol. 29, No. 5, pp. 123-128, Oct. 2014

posttraumatic stress

Social support

work burden

A Study on Job Stress and Work Ability of Technical Workers and Simple Labor Workers in Apartment Construction

이종빈 장성록
Vol. 29, No. 5, pp. 129-135, Oct. 2014

The Comparison of Activities of Occupational Safety and Health among Sub-Sectors of Manufacturing Industry

김기식 이경용
Vol. 29, No. 5, pp. 136-145, Oct. 2014

occupational safety and health

Manufacturing Industry

set priority

Factor Analysis

cluster analysis

Study on the Impact of use of Technology on Work Environment and the Health of Workers

김영선 이경용 진주현 김기식
Vol. 29, No. 5, pp. 146-153, Oct. 2014

technology

ergonomic risks

musculoskeletal complaints

stress symptoms

work organisational practices

working conditions

Developing the Pedestrian Accident Models of Intersections using Tobit Model

이승주 임진강 박병호
Vol. 29, No. 5, pp. 154-159, Oct. 2014

accident model

pedestrian accident

accident at intersection

poisson and negative binomial regression model

tobit regression model

A Study on Severe Accident Management Capabilities and Strategies for CANDU Reactor

최 영 박종호
Vol. 29, No. 5, pp. 160-165, Oct. 2014

Nuclear Power Plant

reactor safety

severe accident management

System design

CANDU

A Study on the Comparison of the Indices of Hazard Analyses for the Construction of Heat Accumulator

이상욱 맹인영 이영섭
Vol. 29, No. 5, pp. 166-171, Oct. 2014

hazard analysis of heat accumulator

indices of hazard analysis of heat accumulator

heat accumulator

AHP

Digital Library