CuWO4/Ti3C2 MXene Heterostructure: Fabrication and Immobilization into a Photocatalytic PVDF Membrane 


Vol. 26,  No. 4, pp. 1493-1505, Apr.  2025
10.1007/s12221-025-00911-6


PDF
  Abstract

Pollution of water caused by organic contaminants is a significant global environmental concern that has paid increasing attention. Polymeric photocatalytic membranes (PPMs) are attracting significant attention for their role in water purification, with benefits of both photocatalysis and membrane separation. In this study, we synthesized a hybrid CuWO4/Ti3C2 MXene heterojunction and immobilized the as-prepared photocatalyst into a polyvinylidene fluoride (PVDF) membrane using phase inversion method to fabricate a photocatalytic membrane system. The CuWO4/Ti3C2 heterostructure, prepared by the hydrothermal method, and immobilized CuWO4/Ti3C2/PVDF membrane exhibit a significant activity in photocatalytic MB degradation performance which is 1.82 and 1.66 times higher than that of pure ones, respectively. This improvement is attributed to the energy band structure of the Schottky heterojunction, leads to enhanced charge transfer efficiency of photo-induced electrons from CuWO4 to Ti3C2 and reduced electron–hole recombination, confirmed by Mott–Schottky and photoluminescence (PL) spectroscopy. Based on the obtained results, the immobilized CuWO4/Ti3C2/PVDF membrane with a satisfactory reusability can be considered as a promising polymeric photocatalytic membrane for water treatment applications.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

A. M. Mousavi, A. A. S. Alvani, R. Salimi, "CuWO4/Ti3C2 MXene Heterostructure: Fabrication and Immobilization into a Photocatalytic PVDF Membrane," Fibers and Polymers, vol. 26, no. 4, pp. 1493-1505, 2025. DOI: 10.1007/s12221-025-00911-6.

[ACM Style]

Amirali Mostafavi Mousavi, Ali Asghar Sabbagh Alvani, and Reza Salimi. 2025. CuWO4/Ti3C2 MXene Heterostructure: Fabrication and Immobilization into a Photocatalytic PVDF Membrane. Fibers and Polymers, 26, 4, (2025), 1493-1505. DOI: 10.1007/s12221-025-00911-6.