Influence of Low Pressure Plasma Treatment on the Durability of Thermoplastic Composites LDPE-flax/coconut under Thermal and Humidity Conditions 


Vol. 19,  No. 6, pp. 1327-1334, Jun.  2018
10.1007/s12221-018-1086-4


PDF
  Abstract

The aim of this work is to study the influence of low pressure plasma (LPP) treatment on the durability of thermoplastic composites using flax and coconut fibers as reinforcement. Two different aging conditions were evaluated, high temperature (73 oC) and high temperature plus water immersion. In both cases five aging times (1, 2, 8, 30 and 60 days) were evaluated. Composite materials were prepared with treated and untreated flax and coconut fibers with 30 % of fiber content and a low density polyethylene (LDPE) matrix. Composites were manufactured using a rotor mixer and a hot plates press. The influence of the aging conditions on each type of fiber, flax or coconut, as well as the plasma treatment effect in all composite materials were studied by determining water absorption and mechanical properties. Mechanical properties were assessed by three point bending tests and the water uptake was determined by weight measurements. Thermal properties were also studied by Differential Scanning Calorimetric (DSC) technique. Finally, the liquids where the specimens were submerged in were evaluated by ultraviolet spectroscopy to analyse cellulose or lignin amounts dissolved. In all cases, durability was mainly affected by the humidity but not so much by high temperatures, obtaining better bending strength and Young셲 modulus in the LPP treated materials, especially those with flax fiber reinforcement.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

B. Enciso, J. Abenojar, E. Paz, M. Martinez, "Influence of Low Pressure Plasma Treatment on the Durability of Thermoplastic Composites LDPE-flax/coconut under Thermal and Humidity Conditions," Fibers and Polymers, vol. 19, no. 6, pp. 1327-1334, 2018. DOI: 10.1007/s12221-018-1086-4.

[ACM Style]

B. Enciso, J. Abenojar, E. Paz, and M.A. Martinez. 2018. Influence of Low Pressure Plasma Treatment on the Durability of Thermoplastic Composites LDPE-flax/coconut under Thermal and Humidity Conditions. Fibers and Polymers, 19, 6, (2018), 1327-1334. DOI: 10.1007/s12221-018-1086-4.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5