Degradation and Drug-release Behavior of Polylactic Acid (PLA) Medical Suture Coating with Tea Polyphenol (TP) -Polycaprolactone (PCL)/Polyglycolide (PGA) 


Vol. 20,  No. 2, pp. 229-235, Feb.  2019
10.1007/s12221-019-8829-8


PDF
  Abstract

The drug-release time of suture should meet with the healing time of wound, so it is needed to control the drugrelease performance of polylactic acid (PLA) suture. In this paper, two biodegradable polymers with different degradation rates, such as polycaprolactone (PCL) and polyglycolide (PGA), were applied to carry the drug of tea polyphenol (TP). The drug-loading finishing solution which is made of PCL/PGA carriers and TP, was coated on the PLA suture. The drug-release rate and time of PLA suture could be regulated by adjusting the proportion of PCL/PGA carriers. The results indicate that the surface of drug-loaded PLA suture becomes rough. There is no obvious chemical reaction among the drug, carriers and PLA suture, just physical adhesion. With the increasing of PCL in drug-carriers, the strength of suture gradually increases. At 70/30 of PCL/PGA, the fracture elongation of suture reaches the highest point. In process of degradation, the surface of drugloaded PLA suture appears some holes after 25 weeks. The strength of sutures decreases gradually during degradation, and the effective strength time of sutures with various proportions of PCL/PGA is different. The drug-release rate of the suture is fast at early stage and slow at later stage and the higher the PGA proportion is, the faster the drug-release rate of the suture is.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

S. Liu, G. Wu, X. Zhang, J. Yu, M. Liu, Y. Zhang, P. Wang, X. Yin, "Degradation and Drug-release Behavior of Polylactic Acid (PLA) Medical Suture Coating with Tea Polyphenol (TP) -Polycaprolactone (PCL)/Polyglycolide (PGA)," Fibers and Polymers, vol. 20, no. 2, pp. 229-235, 2019. DOI: 10.1007/s12221-019-8829-8.

[ACM Style]

Shuqiang Liu, Gaihong Wu, Xiaofang Zhang, Juanjuan Yu, Mingfang Liu, Yao Zhang, Peng Wang, and Xiaolong Yin. 2019. Degradation and Drug-release Behavior of Polylactic Acid (PLA) Medical Suture Coating with Tea Polyphenol (TP) -Polycaprolactone (PCL)/Polyglycolide (PGA). Fibers and Polymers, 20, 2, (2019), 229-235. DOI: 10.1007/s12221-019-8829-8.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5