Microstructure and Mechanical Properties of Unsaturated Polyester Composite Filled with Waste Rubber Glove Crumbs 


Vol. 20,  No. 6, pp. 1290-1300, Jun.  2019
10.1007/s12221-019-8887-y


PDF
  Abstract

Recycling of waste rubber gloves is an alternative to sustainable methods in ensuring that waste rubber does not pile up. The main focus of this investigation is to evaluate the potential of utilising waste rubber gloves as fillers in unsaturated polyester-based composites. The evaluation also studies the effect of different loading of rubber content towards the composite셲 mechanical properties with 8 different rubber contents being considered. Rubber contents of 5, 10, 15, 20, 25, 30, 35 and 40 wt. % have been studied in this work. Waste rubber gloves were ground into crumbs using cryogenic grinding and added into the unsaturated polyester. The composite is characterised for its tensile and flexural strength, elastic modulus, impact strength and fracture surface morphology. The addition of rubber crumbs has increased the toughness of the composite while it decreased the tensile strength, flexural strength and elastic modulus. Due to rubber hydrophobic behaviour, adhesion between rubber crumbs and polyester gets weaker as the rubber content was increased, therefore the tensile strength of the composite dropped. The SEM micrographs of the tensile fracture surface of the composite revealed that voids in the composite increases as the rubber content is increased. Voids occur due to inhomogeneous distribution of rubber crumbs throughout the composite.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

M. Nuzaimah, S. M. Sapuan, R. Nadlene, M. Jawaid, "Microstructure and Mechanical Properties of Unsaturated Polyester Composite Filled with Waste Rubber Glove Crumbs," Fibers and Polymers, vol. 20, no. 6, pp. 1290-1300, 2019. DOI: 10.1007/s12221-019-8887-y.

[ACM Style]

M. Nuzaimah, S. M. Sapuan, R. Nadlene, and M. Jawaid. 2019. Microstructure and Mechanical Properties of Unsaturated Polyester Composite Filled with Waste Rubber Glove Crumbs. Fibers and Polymers, 20, 6, (2019), 1290-1300. DOI: 10.1007/s12221-019-8887-y.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5