Investigation of Longitudinal and Transverse Reinforcing Single Lap Joints of the Polymer Composites/Al under Hygrothermal Condition 


Vol. 21,  No. 10, pp. 2338-2343, Oct.  2020
10.1007/s12221-020-1100-5


PDF
  Abstract

In this study, the effect of longitudinal and transversal reinforcing of epoxy based carbon fiber reinforced composite/Al (CFRP/Al) and glass fiber reinforced composite/Al (GFRP/Al) single lap joints (SLJs) by using of pins and wires has been investigated under hygrothermal conditions. Overall three sets of specimens for each composite/Al joint were manufactured which consist of single lap joint (SLJ), single lap joint reinforced with 6 steel pins of 1 mm diameter in transverse direction (SLJP) and single lap joint reinforced with wires of diameter 0.2 mm, in longitudinal direction (SLJW) for CFRP/Al and GFRP/Al adherends. The tensile properties of the samples were measured after 500 and 1000 hrs. in hygrothermal conditions of 70

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

F. Jafari, R. Eslami-Farsani, S. M. R. Khalili, "Investigation of Longitudinal and Transverse Reinforcing Single Lap Joints of the Polymer Composites/Al under Hygrothermal Condition," Fibers and Polymers, vol. 21, no. 10, pp. 2338-2343, 2020. DOI: 10.1007/s12221-020-1100-5.

[ACM Style]

F. Jafari, R. Eslami-Farsani, and S. M. R. Khalili. 2020. Investigation of Longitudinal and Transverse Reinforcing Single Lap Joints of the Polymer Composites/Al under Hygrothermal Condition. Fibers and Polymers, 21, 10, (2020), 2338-2343. DOI: 10.1007/s12221-020-1100-5.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5