Study on Surface Characteristics of E-glass Fiber Reinforced Epoxy Resin Composites in Different Stages of Tracking 


Vol. 21,  No. 11, pp. 2556-2568, Nov.  2020
10.1007/s12221-020-1265-y


PDF
  Abstract

To study the variation of surface characteristics of glass fiber reinforced epoxy composite insulation materials during the development of tracking, this paper established an experimental platform for tracking under the inclined plate method and prepared samples of glass fiber reinforced epoxy resin. In this paper, according to the experimental discharge phenomenon, discharge repetition rate phase diagram and corrosion degree of materials, the process of tracking was divided into four stages: initiation, stability, development and outbreak stages. Scanning electron microscope was used to observe the change of micromorphology of samples in different stages of tracking. The content of elements in different stages of tracking was determined by energy dispersive spectrometer. The surface characteristic functional groups in different stages of tracking were measured by Fourier transform infrared spectroscopy. The results show that with the change of surface morphology and the formation of surface products during tracking, the content of C element in the spherical region of the material decreased first and then increased, and the content of O and Si increased first and then decreased. The epoxy group of the material was gradually decomposed. Carbonyl group was generated on the surface of the material, and then decomposed during the outbreak stages. In addition, the deterioration mechanism of thermal aging and tracking was quite different. Thermal aging provided convenient routes for the electron injection into the material during tracking, thus reducing the tracking and erosion resistance of the material.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

Y. Wang, C. Feng, Y. Luo, R. Fei, "Study on Surface Characteristics of E-glass Fiber Reinforced Epoxy Resin Composites in Different Stages of Tracking," Fibers and Polymers, vol. 21, no. 11, pp. 2556-2568, 2020. DOI: 10.1007/s12221-020-1265-y.

[ACM Style]

Yongqiang Wang, Changhui Feng, Yu Luo, and Ruoyu Fei. 2020. Study on Surface Characteristics of E-glass Fiber Reinforced Epoxy Resin Composites in Different Stages of Tracking. Fibers and Polymers, 21, 11, (2020), 2556-2568. DOI: 10.1007/s12221-020-1265-y.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5