Effect of Process Parameters on Fiber Diameter and Fiber Distribution of Melt-Blown Polypropylene Microfibers Produced by Biax Line 


Vol. 22,  No. 1, pp. 285-293, Jan.  2021
10.1007/s12221-021-9155-5


PDF
  Abstract

Meltblown nonwovens market has been continuing to grow because of the unique characteristics of allowing the production of microfiber webs directly from a thermoplastic polymer in a single step. Whereas a vast majority of meltblown processes have utilized the traditional Exxon die, the Biax-die has also been used in some processes. The aim of this study was to understand the effect of critical process conditions of the Biax process, which has the advantage of lower high pressure hot air consumption compared to the traditional process, on the structure of meltblown webs. As the performance properties of meltblown nonwovens are mainly determined by the fiber diameter and diameter distribution, this study focused on these two characteristics considering various process conditions such as melt temperature, melt throughput, air temperature and air pressure. In conclusion, it was observed that there were three distribution types, the normal distribution, log-normal distribution, and skewed log-normal distribution, for meltblown webs produced by the Biax process. Air pressure and melt throughput were the most effective process conditions on the fiber diameter of meltblown polypropylene webs. It was also observed that fine fiber webs close to one-micron average fiber diameter and relatively narrower fiber diameter distribution can be produced under appropriate processing conditions using the Biax process.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

N. Hoda, F. Mert, F. Kara, H. G. Atasagun, G. S. Bhat, "Effect of Process Parameters on Fiber Diameter and Fiber Distribution of Melt-Blown Polypropylene Microfibers Produced by Biax Line," Fibers and Polymers, vol. 22, no. 1, pp. 285-293, 2021. DOI: 10.1007/s12221-021-9155-5.

[ACM Style]

Numan Hoda, Firdevs Mert, Fatma Kara, Hande Gul Atasagun, and Gajanan S Bhat. 2021. Effect of Process Parameters on Fiber Diameter and Fiber Distribution of Melt-Blown Polypropylene Microfibers Produced by Biax Line. Fibers and Polymers, 22, 1, (2021), 285-293. DOI: 10.1007/s12221-021-9155-5.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5