Modeling the Geometry of Weft-knitted Integrated Preforms as Reinforcement of Composite Joints 


Vol. 22,  No. 9, pp. 2572-2580, Sep.  2021
10.1007/s12221-021-1180-x


PDF
  Abstract

Joints are the weakest links in the composite pipes under internal pressure due to the discontinuity of reinforcement in connection area. Weft-knitted integrated preforms can be used to enhance the strength of these composite joints. The focus of this study is to develop a geometrical model for the finite element analysis of composite joints reinforced with single jersey weft knitted fabric, which take cylindrical forms. Thus our efforts are concentrated on generating geometrical models for weft-knitted integrated preforms as reinforcement of Tee-joint, and various Wye-joint composites in pipelines. A geometrical model was first developed for loops on the curved surfaces by modifying the offered model for loops on flat surfaces. Then, the joint was divided into two cylinders; main cylinder and joint. Each cylinder was modeled using the generated model for loops on curved surfaces. The modeled cylinders were assembled according to the structure of joints. A python algorithm was proposed to simulate the weft-knitted integrated preforms in Abaqus/CAE 2016 commercial package. By implementing the proposed algorithm, the geometry of reinforcement was modeled for three types of joints based on technical data of ASME-B31. To verify the generated model, T-shape weft knitted integrated preform was produced using glass yarn count of 220 tex, CPC and WPC of 6 and 4, respectively. Comparing the experiment and simulation results shows a maximum error percentage of 10 % in the predicting the structural parameters of joints. It can be concluded that the generated model can well predict the geometry of weft-knitted preforms.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

M. t. G. o. W. I. P. a. R. o. C. Joints, "Modeling the Geometry of Weft-knitted Integrated Preforms as Reinforcement of Composite Joints," Fibers and Polymers, vol. 22, no. 9, pp. 2572-2580, 2021. DOI: 10.1007/s12221-021-1180-x.

[ACM Style]

Modeling the Geometry of Weft-knitted Integrated Preforms as Reinforcement of Composite Joints. 2021. Modeling the Geometry of Weft-knitted Integrated Preforms as Reinforcement of Composite Joints. Fibers and Polymers, 22, 9, (2021), 2572-2580. DOI: 10.1007/s12221-021-1180-x.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5