Preparation and Properties of Electrospun Polyimide Ultrafine Fibrous Mats with Excellent Heat-fusibility via Hot-press procedure from Organo-soluble Polyimides Containing Phenolphthalein Units 


Vol. 23,  No. 1, pp. 68-76, Jan.  2022
10.1007/s12221-021-0091-1


PDF
  Abstract

Electrospun polyimide (PI) ultrafine non-woven fibrous mats (UFMs) with good heat-fusibility via hot press procedure were successfully fabricated. For this purpose, two organo-soluble PI resins were prepared via a two-step chemical imidization procedure from two isomeric oxydiphthalic dianhydrides, including the asymmetrical ODPA (2,3,3',4'- oxydiphthalic dianhydride, or aODPA) and symmetrical ODPA (4,4'-oxydiphthalic dianhydride, or ODPA) with an aromatic diamine containing phenolphthalein unit in the main chain, 3,3-bis[4-(4-aminophenoxy)phenyl]phthalide (BAPPT), respectively. The derived PI-1 (aODPA-BAPPT) and PI-2 (ODPA-BAPPT) resins showed high numerical average molecular weights (Mn) over 105 g/mol and were easily soluble in polar aprotic solvents, such as N-methyl-2-pyrrolidinone (NMP) and N,N-dimethylacetamide (DMAc). PI-1 and PI-2 UFMs were successfully prepared from the PI solutions in DMAc via the one-step electrospinning procedure. Different rotating speeds of 500-2500 round per minute (rpm) for the cylindrical collector were set to investigate the effects of the fiber morphologies on the properties of the PI UFMs. The derived PI UFMs showed good thermal stability with the glass transition temperatures (Tg) over 280 oC and 5 % weight loss temperatures (T5%) higher than 510 oC in nitrogen. The PI UFMs could be successfully heat-sealed via the hot-press temperature at 320 oC (about 40 oC higher than Tg) for 60s with the pressure of 0.5 MPa.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

H. Qi, Y. Zhang, X. Zhi, L. Qi, H. Wu, X. Wei, J. Liu, "Preparation and Properties of Electrospun Polyimide Ultrafine Fibrous Mats with Excellent Heat-fusibility via Hot-press procedure from Organo-soluble Polyimides Containing Phenolphthalein Units," Fibers and Polymers, vol. 23, no. 1, pp. 68-76, 2022. DOI: 10.1007/s12221-021-0091-1.

[ACM Style]

Hao-ran Qi, Yan Zhang, Xin-xin Zhi, Lin Qi, Hao Wu, Xin-ying Wei, and Jin-gang Liu. 2022. Preparation and Properties of Electrospun Polyimide Ultrafine Fibrous Mats with Excellent Heat-fusibility via Hot-press procedure from Organo-soluble Polyimides Containing Phenolphthalein Units. Fibers and Polymers, 23, 1, (2022), 68-76. DOI: 10.1007/s12221-021-0091-1.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5