Digital Library
Vol. 22, No. 5,
May 2021
Constructing Microstructures of Chlorinated Polyvinyl Chloride Microporous Membranes by Non-solvent Induced Phase Separation for High Permeate Flux and Rejection Performance
Xiaomei Zhan Jifeng Cheng Li Xiang Huiju Shao Shuhao Qin
Vol. 22, No. 5, pp. 1189-1199, May 2021
10.1007/s12221-021-0237-1
Vol. 22, No. 5, pp. 1189-1199, May 2021
10.1007/s12221-021-0237-1
Effect of PVDF Concentration and Number of Fiber Lines on Piezoelectric Properties of Polymeric PVDF Biosensors
Yo-Seung Song Yonghyeon Yun Deuk Yong Lee Bae-Yeon Kim
Vol. 22, No. 5, pp. 1200-1207, May 2021
10.1007/s12221-021-0509-9
Vol. 22, No. 5, pp. 1200-1207, May 2021
10.1007/s12221-021-0509-9
Bacterial Cellulose Immobilized S. cerevisiae as Microbial Sensor for Rapid BOD Detection
Chenyu Zhao Guangshu Wang Mengtao Sun Zewei Cai Zichu Yin
Yurong Cai
Vol. 22, No. 5, pp. 1208-1217, May 2021
10.1007/s12221-021-0650-5
Yurong Cai
Vol. 22, No. 5, pp. 1208-1217, May 2021
10.1007/s12221-021-0650-5
Fluorescent Sizing Agents Based on Aggregation-Induced Emission Effect for Accurate Evaluation of Permeability and Coating Property
Enqi Jin Zhengke Wang Manli Li Qiaoling Hu Ben Zhong Tang
Jiugang Yuan
Vol. 22, No. 5, pp. 1218-1227, May 2021
10.1007/s12221-021-0452-9
Jiugang Yuan
Vol. 22, No. 5, pp. 1218-1227, May 2021
10.1007/s12221-021-0452-9
Properties of Bacterial Cellulose and Its Nanocrystalline Obtained from Pineapple Peel Waste Juice
Budiman Anwar Bunbun Bundjali Yayan Sunarya I Made Arcana
Vol. 22, No. 5, pp. 1228-1236, May 2021
10.1007/s12221-021-0765-8
Vol. 22, No. 5, pp. 1228-1236, May 2021
10.1007/s12221-021-0765-8
Improvement of Mechanical and Flame Retardant Properties of Natural Rubber by Eco-friendly Watermelon Peel and Crumb Rubber
The Effect of Bulk Electrospun Polycaprolactone-graphene Oxide Scaffold on the Healing of Defected Femur Cartilage on a Rabbit Model
Farnaz Moradi Adeleh Gholipour-Kanani Najmeh Najmoddin Niloofar Eslahi S. Hajir Bahrami
Shahram Rabbani
Vol. 22, No. 5, pp. 1247-1255, May 2021
10.1007/s12221-021-0652-3
Shahram Rabbani
Vol. 22, No. 5, pp. 1247-1255, May 2021
10.1007/s12221-021-0652-3
Processing and Tensile Properties of Twisted Core-Shell Yarns Fabricated by Double Nozzle Electrospinning Device
Homa Maleki and Rouhollah Semnani Rahbar
Vol. 22, No. 5, pp. 1256-1265, May 2021
10.1007/s12221-021-0572-2
Vol. 22, No. 5, pp. 1256-1265, May 2021
10.1007/s12221-021-0572-2
Determination of the Adhesion Between Electrospun Mats through Peel Tests
Preparation and Characterization of Polyethylene Glycol Functional Hydroxyapatite/Polycaprolactone Electrospun Biomembranes for Bone Tissue Engineering Applications
The Performance Promotion of Polyphenylene Sulfide Fibers Based on the Hygroscopic and Dyeable Characteristics
Usage of Barium Titanate in Fabric Coating and Investigation of Some Properties
Rumeysa Celen Gizem Manasoglu Yusuf Ulcay Mehmet Kanik
Vol. 22, No. 5, pp. 1296-1303, May 2021
10.1007/s12221-021-0440-0
Vol. 22, No. 5, pp. 1296-1303, May 2021
10.1007/s12221-021-0440-0
Improving the Dyeability of Polypropylene Fibers Using Nanoclay and Plasma Treatment
Aminoddin Haji Rouhollah Semnani Rahbar Amin Ebrahimzade
Vol. 22, No. 5, pp. 1304-1313, May 2021
10.1007/s12221-021-0101-3
Vol. 22, No. 5, pp. 1304-1313, May 2021
10.1007/s12221-021-0101-3
Dyeing Characteristics of Polypropylene Fabric Dyed with Special Disperse Dyes Using Supercritical Carbon Dioxide
Tarek Abou Elmaaty Hanan Elsisi Ilham Negm
Vol. 22, No. 5, pp. 1314-1319, May 2021
10.1007/s12221-021-0302-9
Vol. 22, No. 5, pp. 1314-1319, May 2021
10.1007/s12221-021-0302-9
Dyeing Wool Knitted Fabric in Nano-scale Reverse Micelle with Reactive Dyes - A Computer Colour Matching Study
Cheng-Hao Lee Yanming Wang Yiu-Lun Tang Chi-Wai Kan
Vol. 22, No. 5, pp. 1320-1332, May 2021
10.1007/s12221-021-0846-8
Vol. 22, No. 5, pp. 1320-1332, May 2021
10.1007/s12221-021-0846-8
Synthesis and Application of Reactive Dyes Based on Azo-Anthraquinone Skeleton to Realize Clean Printing of Cotton Fabrics
Hongjuan Zhang Liujun Pei Shuaitong Liang Qun Wang Jingming Huang
Xiaomin Gu Jiping Wang
Vol. 22, No. 5, pp. 1333-1342, May 2021
10.1007/s12221-021-0271-z
Xiaomin Gu Jiping Wang
Vol. 22, No. 5, pp. 1333-1342, May 2021
10.1007/s12221-021-0271-z
Micromechanics Modeling of Electrical Conductivity for Polymer Nanocomposites by Network Portion, Interphase Depth, Tunneling Properties and Wettability of Filler by Polymer Media
A Microscopic Cohesive Zone Model and Effects of Interface on the Transverse Mechanical Properties for Composites
Wenbin Jia Lei Fang Zhi Chen Kai Zhao Hongmei Huang
Lei Pan
Vol. 22, No. 5, pp. 1352-1365, May 2021
10.1007/s12221-021-0150-7
Lei Pan
Vol. 22, No. 5, pp. 1352-1365, May 2021
10.1007/s12221-021-0150-7
Synthesis Effect of Nano-fillers on the Damage Resistance of GLARE
M. Megahed M. A. Abd El-baky A. M. Alsaeedy A. E. Alshorbagy
Vol. 22, No. 5, pp. 1366-1377, May 2021
10.1007/s12221-021-0570-4
Vol. 22, No. 5, pp. 1366-1377, May 2021
10.1007/s12221-021-0570-4
Optimization of Compounding Parameters for Extrusion to Enhance Mechanical Performance of Kenaf-Polypropylene Composites
Muhammad Shafiq Irfan Rehan Umer Sanjeev Rao
Vol. 22, No. 5, pp. 1378-1387, May 2021
10.1007/s12221-021-0676-8
Vol. 22, No. 5, pp. 1378-1387, May 2021
10.1007/s12221-021-0676-8
Effects of Ammonium Polyphosphate on the Flame Retarding, Tensile, Dynamic Mechanical, and Thermal Properties of Kenaf Fiber/Poly(lactic acid) Biocomposites Fabricated by Compression Molding
The Effect of Crack Orientation on the Propagation of Cracks in Graphene Nanoplatelet Carbon Fiber-reinforced Epoxy Composites Using Digital Image Correlation
Green and Facile Fabrication of Thermal Superamphiphobic Nanofibrillated-cellulose/Chitosan/OTS Composites Through Mechano-Chemical Method
Yushan Yang Liang Shan Huajie Shen Jian Qiu
Vol. 22, No. 5, pp. 1407-1415, May 2021
10.1007/s12221-021-0221-9
Vol. 22, No. 5, pp. 1407-1415, May 2021
10.1007/s12221-021-0221-9
Understanding the Effect of Halloysite Nanotubes Addition Upon the Mechanical Properties of Glass Fiber Aluminum Laminate
Ammar A. Melaibari Mohamed A. Attia Marwa A. Abd El-baky
Vol. 22, No. 5, pp. 1416-1433, May 2021
10.1007/s12221-021-0656-z
Vol. 22, No. 5, pp. 1416-1433, May 2021
10.1007/s12221-021-0656-z
Mechanical Properties of Keratin Composite Films Using Poultry Feathers as Reinforcement Fibers
Shuming Shen Xuhong Yang Xiaofang Xu
Vol. 22, No. 5, pp. 1434-1440, May 2021
10.1007/s12221-021-0339-9
Vol. 22, No. 5, pp. 1434-1440, May 2021
10.1007/s12221-021-0339-9
Investigation of Tensile Properties of Glass Fiber/Epoxy Nanocomposites Laminates Enhanced with Graphene Nanoparticles
Mehmet 횉a휓r캇 T체zemen Farnoud Khakzad Elmas Salamci
Vol. 22, No. 5, pp. 1441-1448, May 2021
10.1007/s12221-021-0521-0
Vol. 22, No. 5, pp. 1441-1448, May 2021
10.1007/s12221-021-0521-0
A Comparative Analysis on the Processing Aspects of Basalt and Glass Fibers Reinforced Composites
Antonella Patti Luigi Nele Mauro Zarrelli Lucia Graziosi Domenico Acierno
Vol. 22, No. 5, pp. 1449-1459, May 2021
10.1007/s12221-021-0184-x
Vol. 22, No. 5, pp. 1449-1459, May 2021
10.1007/s12221-021-0184-x
Mechanical Properties of PP/Glass Fiber/Kenaf/Bamboo Fiberreinforced Hybrid Composite
Su Kyoung Lee Eun Young Park Tae Sung Park Seung Kook An
Vol. 22, No. 5, pp. 1460-1465, May 2021
10.1007/s12221-021-0358-6
Vol. 22, No. 5, pp. 1460-1465, May 2021
10.1007/s12221-021-0358-6
Modeling of Void Formation Based on Non-isothermal Conditions in Liquid Composite Molding for Plain-weave Fabric
A Study on Optimization of Irradiation Frequency for Ultrasonic Laundry of Textile
Wuchao Wang Qi Zhou Haofan Long Yanyun Zhang Luqman Jameel Rather
Qing Li
Vol. 22, No. 5, pp. 1482-1489, May 2021
10.1007/s12221-021-0573-1
Qing Li
Vol. 22, No. 5, pp. 1482-1489, May 2021
10.1007/s12221-021-0573-1