Improvement of Oil Seal Geometry to Improve Durability of Lateral Damper of Electric Multiple Unit 


Vol. 33,  No. 4, pp. 90-97, Aug.  2018
10.14346/JKOSOS.2018.33.4.90


PDF
  Abstract

As the result(also after it’s been carried out the damping force test with 800ea lateral dampers of 50ea trainset from entering heavy maintenance workshop to implement heavy maintenance inspection cycle, there were 86.25%(650ea) which were out of 350kg ± 15% of the standard value of damping force compared to the reference value. After the implementation of heavy maintenance inspection cycle, it’s been examined damping force test with total samples 32ea(samples 8ea per a trainset) from actual running EMU 4ea trainset. As the result, percent defective was 84.4%(27ea), which was a very high level. System. The lateral damper’s the failure cause of damping force defective was oil leakage caused by tearing crack of oil seal and foreign material in oil iron 473 ~ 1932 times higher than that of new oil, copper 36 ~ 98 times higher than that of new oil reduced oil amount cycling damping valve. It resulted from the change cause of damping force. In the static analysis on the shape of lateral damper oil seal’s the existing and improved product, the stress of the improved product was smaller than that of the existing product. In the fatigue analysis, the existing product showed a low life in the upper area. However, in case of the improved product, it could be confirmed that the destruction did not occur up to the specified 1.0e + 006 cycles and the lifetime was further improved in most areas.

  Statistics
Cumulative Counts from November, 2022
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.


  Cite this article

[IEEE Style]

김용욱 and 구정서, "Improvement of Oil Seal Geometry to Improve Durability of Lateral Damper of Electric Multiple Unit," Journal of the Korean Society of Safety, vol. 33, no. 4, pp. 90-97, 2018. DOI: 10.14346/JKOSOS.2018.33.4.90.

[ACM Style]

김용욱 and 구정서. 2018. Improvement of Oil Seal Geometry to Improve Durability of Lateral Damper of Electric Multiple Unit. Journal of the Korean Society of Safety, 33, 4, (2018), 90-97. DOI: 10.14346/JKOSOS.2018.33.4.90.

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search ▼

POPULAR KEYWORDS
(TOP 10 KEYWORDS)

Recent Publications
(LAST 3 YEARS)

pISSN : 1229 - 9197
eISSN : 1875 - 0052

Impact Factor(2022): 2.5