Fibers And Polymers

Mohammad Karim Haidar Selin Seda Timur G체len Melike Demirbolat Emirhan Nemutlu R. Neslihan G체rsoy
Kezban Ulubayram Levent 횜ner Hakan Ero휓lu
Vol. 22, No. 2, pp. 334-344, Feb. 2021

10.1007/s12221-021-0228-2

Composite nanofibers

Nanoparticles

Dual release

Atorvastatin calcium

Alpha-lipoic acid

Highly Uniform Core/Shell Structured CoFe2O4/MIL-100(Fe) Nanofibers for Efficient Visible Light Photocatalysis

Jun Liu Meng Sun Meng-Jie Chang Si-Meng Fan Qian Hui
Fu-Rong Ni Bin Yuan
Vol. 22, No. 2, pp. 345-353, Feb. 2021

10.1007/s12221-021-0149-0

Synergistic Flame Retardant Effect of Organic Boron Flame Retardant and Aluminum Hydroxide on Polyethylene

Lianghui Ai Shanshan Chen Liu Yang Ping Liu
Vol. 22, No. 2, pp. 354-365, Feb. 2021

10.1007/s12221-021-9385-6

Method for Characterizing the Rate-dependent Behavior of Aramid Fibers Coated with Shear Thickening Fluids

Sungjin Han Wonjin Na Hyunchul Ahn Woong-Ryeol Yu
Vol. 22, No. 2, pp. 366-372, Feb. 2021

10.1007/s12221-021-0152-5

Aramid fiber

Rate-dependent behavior

Shear thickening fluid

Single fiber pull-out test

Cohesive zone model

Tuning the Mechanical Properties of Silkworm Silk Fibres by Thermally Induced Modification of Crystalline Nanostructure

Shan Du Weitao Zhou Xing Jin Yimin Zhang Xiangxiang Chen
Jin Zhang Jingliang Li Xungai Wang
Vol. 22, No. 2, pp. 373-381, Feb. 2021

10.1007/s12221-021-9352-2

A. pernyi

B. mori

Mechanical property

Crystalline structure

The Influence of a Natural UV Absorber (Areca catechu) on the UV Protection and Antimicrobial Properties of Silk and Nylon Fabrics

Shekh Md. Mamun Kabir Avik Kumar Dhar Joonseok Koh
Vol. 22, No. 2, pp. 382-386, Feb. 2021

10.1007/s12221-021-9950-z

Areca catechu

Ultraviolet absorber

Ultraviolet protection factor

Antimicrobial properties

Facile Fabrication of Flame-retardant SiO2/APP@PDMS Fabric with Superhydrophobicity for Highly Efficient Oil/Water Separation

Weijing Zhao Xinyan Xiao Zhihao Ye
Vol. 22, No. 2, pp. 387-395, Feb. 2021

10.1007/s12221-021-9399-0

SiO2/APP@PDMS fabric

Ultrasound-assisted sol-gel method

Flame-retardant property

Superhydrophobicity

Oil/water separation

New Washing-Free Printing Binder Based on Fluorosilicone-Modified Polyacrylate for Polyester Fabric Printing with a Disperse Dye

Lu Zhang Qingquan Zhou Qipeng Zhang Minghua Wu
Vol. 22, No. 2, pp. 396-404, Feb. 2021

10.1007/s12221-021-9090-5

Washing-free printing

Solvent Assisted Dyeing of Silk Fabric Using Deep Eutectic Solvent as a Swelling Agent

Sushant S. Pawar Ashok Athalye Ravindra V. Adivarekar
Vol. 22, No. 2, pp. 405-411, Feb. 2021

10.1007/s12221-021-0142-7

Ionic liquid

Deep eutectic solvent

Non-aqueous

Silk dyeing

Solvent assisted dyeing

Color Prediction for Pre-Colored Cotton Fiber Blends Based on Improved Kubelka-Munk Double-Constant Theory

Ge Zhang Jian Zhou Ruru Pan Lei Wang Weidong Gao

Vol. 22, No. 2, pp. 412-420, Feb. 2021

10.1007/s12221-021-9371-z

Pre-colored fiber blends

Color prediction

K-M double-constant theory

Least squares method

color difference

Ecofriendly Modification of Acrylic Fabrics for Enhanced Transfer Printability

Lamiaa K. El Gabry Amira Adel Abou El-Kheir Hanan S. El-Sayad Madiha A. El-Kashouty
Vol. 22, No. 2, pp. 421-429, Feb. 2021

10.1007/s12221-021-9042-0

A New Interfacial Model for Transverse Mechanical Properties of Unidirectional Fiber Reinforced Composites

Deng셙n Cai Xiaopei Wang Yaohui Shi Xufeng Hao Yuan Qian
Guangming Zhou
Vol. 22, No. 2, pp. 430-441, Feb. 2021

10.1007/s12221-021-0110-2

RVE

Interface

Transverse properties

Damage Mechanism

Fiber volume fraction

Behavior of Polybenzoxazine Composites Reinforced with Modified Carbon Nanotubes

Damiro Ahn Hyun-Jung Choi Sang Young Yeo Hodong Kim
Vol. 22, No. 2, pp. 442-450, Feb. 2021

10.1007/s12221-021-9362-0

Polybenzoxazine

Carbon nanotube

Thermosetting resin

Electrical conductivity

Thermal stability

Mechanical Properties of Special-shaped Mo Fiber Reinforced Mineral-filled Polymer Composite

Xiuhua Ren Chao Zhang Jianhua Zhang Peng Liu Guangjiu Qin

Vol. 22, No. 2, pp. 451-459, Feb. 2021

10.1007/s12221-021-0430-2

Composite

Fiber

Mechanical properties

Interface bonding strength

Carbon/Epoxy Composites Fabricated by Vacuum Consolidation of the Interleaved Layup of Prepregs and Dry Fibers

Yu-Hui Yang and Wen-Bin Young
Vol. 22, No. 2, pp. 460-468, Feb. 2021

10.1007/s12221-021-0325-2

Out-of-autoclave process

OOA

VBO

Prepreg

Progressive Damage Analysis of Carbon Fabric-reinforced Polymer Composites under Three-point Bending

Kang-ning Han Wei Zhou Reng Qin Sa Yang Lian-Hua Ma

Vol. 22, No. 2, pp. 469-479, Feb. 2021

10.1007/s12221-021-0357-7

Carbon fiber

Carbon nanotubes

Three-point bend progressive damage

Acoustic emission

Micro-CT

High Velocity Impact Response and Damage Mechanism of an Aluminium/Glass-Carbon Fiber/Epoxy Composite Plate Reinforced with Graphene Nano-plates

Shayan Shahjouei Mohammad Reza Barati Mehdi Yarmohammad Tooski
Vol. 22, No. 2, pp. 480-488, Feb. 2021

10.1007/s12221-021-0105-z

Development of Polydiacetylene Embedded Polyurethane Nanocomposites as a Mask for Sensing and Filtering Fine Dust

Jeong Hwa Kim and Jung-Soon Lee
Vol. 22, No. 2, pp. 489-497, Feb. 2021

10.1007/s12221-021-0187-7

Polydiacetylene

Polyurethane

Nanocomposite

Sensing and filtering

Fine Dust

Green Composites Based on Polypropylene and Recycled Coffee Gunny: Morphology, Thermal and Mechanical Properties

Yeng-Fong Shih Venkata Krishna Kotharangannagari Bo-Yu Su
Vol. 22, No. 2, pp. 498-508, Feb. 2021

10.1007/s12221-021-9219-6

Polypropylene

Coffee gunny

Jute fiber

Composites and mechanical properties

Layup Design Optimization for E-glass Woven Roving Fabric Reinforced Polyester Composite Laminates Produced by VARTM

Raif Sakin
Vol. 22, No. 2, pp. 509-527, Feb. 2021

10.1007/s12221-021-0087-x

Layup design optimization

Woven roving fabric

Mechanical properties

Anisotropy factor

Permeability

Novel Hybrid Nanostructures of Carbon Nanotube/Fullerene-like Tungsten Disulfide as Reinforcement for Aramid Fabric Composites

Vera Obradovi훶 Danica Simi훶 Milorad Zrili훶 Du큄ica B. Stojanovi훶 Petar S. Uskokovi훶

Vol. 22, No. 2, pp. 528-539, Feb. 2021

10.1007/s12221-021-0278-5

Aramid fibers

Silane coating

o-SWCNT/m-IF hybrid nanoparticles

Anti-stabbing properties

Thermomechanical analysis

A Porous Sodium Alginate-CaSiO3 Polymer Reinforced with Graphene Nanosheet: Fabrication and Optimality Analysis

Shahin Foroutan Mohammad Hashemian Mehdi Khosravi Mazyar Ghadiri Nejad Azadeh Asefnejad
Saeed Saber-Samandari Amirsalar Khandan
Vol. 22, No. 2, pp. 540-549, Feb. 2021

10.1007/s12221-021-0347-9

Graphene nanosheet

Freeze-drying

Global criterion method

Nanocomposite

Mechanical performance

Investigation on Stiffness of Finished Stretch Plain Knitted Fabrics Using Fuzzy Decision Trees and Artificial Neural Networks

Rania Baghdadi Hamza Alibi Faten Fayala Xianyi Zeng
Vol. 22, No. 2, pp. 550-558, Feb. 2021

10.1007/s12221-021-9314-8

Fuzzy decision trees

ANN

Virtual-leave-one-out

Stretch finished knitted fabrics

Stiffness

The Influence of Moisture Content on Shrinkage of Wool Fabrics during Domestic Tumble Drying Process

Wei Bao Jinsong Shen Xuemei Ding
Vol. 22, No. 2, pp. 559-566, Feb. 2021

10.1007/s12221-021-9207-x

Evaluation of Some Comfort and Mechanical Properties of Knitted Fabrics Made of Different Regenerated Cellulosic Fibres

Erhan Kenan 횉even and Gizem Karakan G체nayd캇n
Vol. 22, No. 2, pp. 567-577, Feb. 2021

10.1007/s12221-021-0246-0

Collagen peptide fibre

Thermal comfort

Water vapour permeability

Bursting strength

The Effect of Inner Layer Fiber Diameter and Fabric Structure on Transplanar Water Absorption and Transfer of Double-layered Knitted Fabrics

Bahareh Yousefi S. Mohammad Hosseini Varkiani Siamak Saharkhiz Zahra Khorram Toussi
Vol. 22, No. 2, pp. 578-586, Feb. 2021

10.1007/s12221-021-9430-5

Double-layered knitted fabric

Wicking

Transplanar water transfer

Absorption capacity

Rate of evaporation

Digital Library

Mechanical, Tensile Creep and Viscoelastic Properties of Thermoplastic Polyurethane/Polycarbonate Blends

Fabrication of PAN/Ag/ZnO Microporous Membrane and Examination of Visible Light Photocatalytic Performance

Analysis of PLA Blends Using Weighted Relaxation Spectrum

Fabrication and Characterization of Multiple Herbal Extracts-loaded Nanofibrous Patches for Topical Treatment of Acne Vulgaris

Electrospun Nanofibers for Dual and Local Delivery of Neuroprotective Drugs

Highly Uniform Core/Shell Structured CoFe2O4/MIL-100(Fe) Nanofibers for Efficient Visible Light Photocatalysis

Synergistic Flame Retardant Effect of Organic Boron Flame Retardant and Aluminum Hydroxide on Polyethylene

Method for Characterizing the Rate-dependent Behavior of Aramid Fibers Coated with Shear Thickening Fluids

Tuning the Mechanical Properties of Silkworm Silk Fibres by Thermally Induced Modification of Crystalline Nanostructure

The Influence of a Natural UV Absorber (Areca catechu) on the UV Protection and Antimicrobial Properties of Silk and Nylon Fabrics

Facile Fabrication of Flame-retardant SiO2/APP@PDMS Fabric with Superhydrophobicity for Highly Efficient Oil/Water Separation

New Washing-Free Printing Binder Based on Fluorosilicone-Modified Polyacrylate for Polyester Fabric Printing with a Disperse Dye

Solvent Assisted Dyeing of Silk Fabric Using Deep Eutectic Solvent as a Swelling Agent

Color Prediction for Pre-Colored Cotton Fiber Blends Based on Improved Kubelka-Munk Double-Constant Theory

Ecofriendly Modification of Acrylic Fabrics for Enhanced Transfer Printability

A New Interfacial Model for Transverse Mechanical Properties of Unidirectional Fiber Reinforced Composites

Behavior of Polybenzoxazine Composites Reinforced with Modified Carbon Nanotubes

Mechanical Properties of Special-shaped Mo Fiber Reinforced Mineral-filled Polymer Composite

Carbon/Epoxy Composites Fabricated by Vacuum Consolidation of the Interleaved Layup of Prepregs and Dry Fibers

Progressive Damage Analysis of Carbon Fabric-reinforced Polymer Composites under Three-point Bending

High Velocity Impact Response and Damage Mechanism of an Aluminium/Glass-Carbon Fiber/Epoxy Composite Plate Reinforced with Graphene Nano-plates

Development of Polydiacetylene Embedded Polyurethane Nanocomposites as a Mask for Sensing and Filtering Fine Dust

Green Composites Based on Polypropylene and Recycled Coffee Gunny: Morphology, Thermal and Mechanical Properties

Layup Design Optimization for E-glass Woven Roving Fabric Reinforced Polyester Composite Laminates Produced by VARTM

Novel Hybrid Nanostructures of Carbon Nanotube/Fullerene-like Tungsten Disulfide as Reinforcement for Aramid Fabric Composites

A Porous Sodium Alginate-CaSiO3 Polymer Reinforced with Graphene Nanosheet: Fabrication and Optimality Analysis

Investigation on Stiffness of Finished Stretch Plain Knitted Fabrics Using Fuzzy Decision Trees and Artificial Neural Networks

The Influence of Moisture Content on Shrinkage of Wool Fabrics during Domestic Tumble Drying Process

Evaluation of Some Comfort and Mechanical Properties of Knitted Fabrics Made of Different Regenerated Cellulosic Fibres

The Effect of Inner Layer Fiber Diameter and Fabric Structure on Transplanar Water Absorption and Transfer of Double-layered Knitted Fabrics

Submenu

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search

Recent Publications
(LAST 3 YEARS)

Digital Library

Submenu

Search (IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

Advanced Search

POPULAR KEYWORDS(TOP 10 KEYWORDS)

Search
(IN TITLE, AUTHOR, ABSTRACT,KEYWORDS)

POPULAR KEYWORDS
(TOP 10 KEYWORDS)