Digital Library
Vol. 23, No. 10,
Oct. 2022
Effects of Introduction of L-Lactide on Microstructures, Thermal Properties and In vitro Degradation of Poly(glycolide-co-琯-caprolactone) Block Copolymer
Min Ho Jee Ji Hee Park Song Yeon Choi Doo Hyun Baik
Vol. 23, No. 10, pp. 2683-2691, Oct. 2022
10.1007/s12221-022-0283-3
Vol. 23, No. 10, pp. 2683-2691, Oct. 2022
10.1007/s12221-022-0283-3
Facile Fabrication of Superhydrophobic Cellulose/Fe2O3-STA Film with Nanoflower Morphologies for Heavy Oil Removal
Chang-Lian Xu Shiyi Wang Lu Zhou Yiwen Bi Gang Yang
Jun Wu Xiaohong Zhang
Vol. 23, No. 10, pp. 2692-2698, Oct. 2022
10.1007/s12221-022-3101-z
Jun Wu Xiaohong Zhang
Vol. 23, No. 10, pp. 2692-2698, Oct. 2022
10.1007/s12221-022-3101-z
Improvement of Surface Hardness of Transparent Poly(amideimide) Films Using Fumed Silica Nanoparticles
A Young Kim Yu Shin Eom Ji Ho Youk
Vol. 23, No. 10, pp. 2699-2706, Oct. 2022
10.1007/s12221-022-0416-8
Vol. 23, No. 10, pp. 2699-2706, Oct. 2022
10.1007/s12221-022-0416-8
Enhancing Physiochemical Properties of Chitosan Films Through Photo-crosslinking by Riboflavin
Shengyu Zhu Jiliu Pei Yukang Song Yu Liu Feng Xue
Xiaohui Xiong Chen Li
Vol. 23, No. 10, pp. 2707-2716, Oct. 2022
10.1007/s12221-022-0278-0
Xiaohui Xiong Chen Li
Vol. 23, No. 10, pp. 2707-2716, Oct. 2022
10.1007/s12221-022-0278-0
Long-term Photo-degradation of Nanofibrous Composites Based on Poly(3-hydroxybutyrate) Electrospun Fibers Loaded with Zinc Oxide Nanoparticles
Experimental and Simulation Investigation on the Effect of Slot Angle on the Flush Sharp Die Performance during Melt Blowing
Xibo Hao Guojun Jiang Jin Tao Guoliang Liu Sheng Xie
Vol. 23, No. 10, pp. 2725-2731, Oct. 2022
10.1007/s12221-022-0175-6
Vol. 23, No. 10, pp. 2725-2731, Oct. 2022
10.1007/s12221-022-0175-6
Investigation on the Airflow Fields of New Melt-blown Dies with Rectangular Jets
Yudong Wang Fang Jiang Wan셞 Ning Sheng Xie Changchun Ji
Vol. 23, No. 10, pp. 2732-2739, Oct. 2022
10.1007/s12221-022-0043-4
Vol. 23, No. 10, pp. 2732-2739, Oct. 2022
10.1007/s12221-022-0043-4
Hexadecylamine Modified Copper Nanowire Coated Superhydrophobic Cotton Fabric for Antifouling, Oil-water Separation, and Infrared Reflection Applications
Jiaojiao Zheng Hong Zhang Tianyu Cao Yuanyuan Zhu Lizhong He
Jianwei Li Xudong Chen Yinhu Qu
Vol. 23, No. 10, pp. 2740-2747, Oct. 2022
10.1007/s12221-022-0049-y
Jianwei Li Xudong Chen Yinhu Qu
Vol. 23, No. 10, pp. 2740-2747, Oct. 2022
10.1007/s12221-022-0049-y
Stretchable Electromagnetic Interference Shielding Textile Using Conductive Polymers and Metal Nanoparticles
Vahid Shakeri Siavashani Nevin Cigdem Gursoy Majid Montazer Pelin Altay
Vol. 23, No. 10, pp. 2748-2759, Oct. 2022
10.1007/s12221-022-4492-6
Vol. 23, No. 10, pp. 2748-2759, Oct. 2022
10.1007/s12221-022-4492-6
Fabrication of Bio-based Coloristic and Ultraviolet Protective Cellulosic Fabric Using Chitosan Derivative and Chestnut Shell Extract
Yanmei Jia Hongwu Jiang Yan Wang Zhimei Liu Peng Liang
Vol. 23, No. 10, pp. 2760-2768, Oct. 2022
10.1007/s12221-022-4940-3
Vol. 23, No. 10, pp. 2760-2768, Oct. 2022
10.1007/s12221-022-4940-3
Antibacterial Activity of Photodeposited Ag Nanoparticles on Cotton Fibers Enabled by Atomic Layer Deposition
Halil I. Akyildiz Busra Aydemir Yilmaz Sumeyye Diler
Vol. 23, No. 10, pp. 2769-2779, Oct. 2022
10.1007/s12221-022-4348-0
Vol. 23, No. 10, pp. 2769-2779, Oct. 2022
10.1007/s12221-022-4348-0
Magnetically Recyclable Wool/Fe3O4@TiO2/UiO-66 Core-Shell Structured Composite for Photocatalytic Removal of Methylene Blue, Congo Red, Tetracycline Hydrochloride and Cr(VI) Ions
Chang Tian Hui Zhang Pei Chen Yueyue Song Jinyuan Zhang
Vol. 23, No. 10, pp. 2780-2797, Oct. 2022
10.1007/s12221-022-0225-0
Vol. 23, No. 10, pp. 2780-2797, Oct. 2022
10.1007/s12221-022-0225-0
Substantial Functional Finishing and Transfer Printing of Polyester Fabric Using Zinc Oxide/Polyurethane Nanocomposite
Samiha M. Abo El-Ola Magda A. El-Bendary Nasser H. Mohamed Rehab M. Kotb
Vol. 23, No. 10, pp. 2798-2808, Oct. 2022
10.1007/s12221-022-4257-2
Vol. 23, No. 10, pp. 2798-2808, Oct. 2022
10.1007/s12221-022-4257-2
Fe(II)-Anchored Cotton Fabric for Heterogeneous Fenton Degradation of Rhodamine B Dye
Yuhui Yang Hongbin Chen Ruquan Zhang Jingjing Huang Zhikui Bai
Shili Xiao
Vol. 23, No. 10, pp. 2809-2819, Oct. 2022
10.1007/s12221-022-4104-5
Shili Xiao
Vol. 23, No. 10, pp. 2809-2819, Oct. 2022
10.1007/s12221-022-4104-5
Color Fastness and Tensile Properties of Cotton Fabric Dyed with Extract from Albizia Procera Sawdust
Shahin Sultana Khaleda Akter Md. Khabir Uddin Sarker Riyadh Hossen Bhuiyan Mohammad Majedul Haque
Md. Rafiqul Islam
Vol. 23, No. 10, pp. 2820-2827, Oct. 2022
10.1007/s12221-022-4707-x
Md. Rafiqul Islam
Vol. 23, No. 10, pp. 2820-2827, Oct. 2022
10.1007/s12221-022-4707-x
Bicomponent Polyesters Filaments with High Performances:Study of Their Stability before and after Dyeing with Low, Medium, and High Energy Disperse Dyes
Marwa Souissi Ramzi Khiari Mounir Zaag Nizar Meksi Hatem Dhaouadi
Vol. 23, No. 10, pp. 2828-2837, Oct. 2022
10.1007/s12221-022-4294-x
Vol. 23, No. 10, pp. 2828-2837, Oct. 2022
10.1007/s12221-022-4294-x
Highly Porous Poly(o-Phenylenediamine) Loaded Magnetic Carboxymethyl Cellulose Hybrid Beads for Removal of Two Model Textile Dyes
Tugce A. Arica Fadime Mert Balci Sinan Balci Mehmet Yakup Arica
Vol. 23, No. 10, pp. 2838-2854, Oct. 2022
10.1007/s12221-022-0221-4
Vol. 23, No. 10, pp. 2838-2854, Oct. 2022
10.1007/s12221-022-0221-4
Alkaline Treatment's Effect on Mechanical Properties and Damage Assessment Through Acoustic Emission of Luffa Fiber Composite
Massinissa Grabi Ahmed Chellil Mohamed Habibi Luc Laperriere
Vol. 23, No. 10, pp. 2855-2865, Oct. 2022
10.1007/s12221-022-4676-0
Vol. 23, No. 10, pp. 2855-2865, Oct. 2022
10.1007/s12221-022-4676-0
Optimization of Flame Retardancy & Mechanical Performance of Jute-glass/Epoxy Hybrid Composites
Muhammad Umair Ayesha Shahbaz Ahsan Ahmad Sohaib Arif Khubab Shaker
Madeha Jabbar Yasir Nawab
Vol. 23, No. 10, pp. 2866-2874, Oct. 2022
10.1007/s12221-022-4049-8
Madeha Jabbar Yasir Nawab
Vol. 23, No. 10, pp. 2866-2874, Oct. 2022
10.1007/s12221-022-4049-8
Mechanical, Thermal and Morphological Properties of Woven Kenaf Fiber Reinforced Polylactic Acid (PLA) Composites
Mohd Azlin Mohd Nor Salit Mohd Sapuan Mohd Zuhri Mohamed Yusoff Edi Syams Zainudin
Vol. 23, No. 10, pp. 2875-2884, Oct. 2022
10.1007/s12221-022-4370-2
Vol. 23, No. 10, pp. 2875-2884, Oct. 2022
10.1007/s12221-022-4370-2
Evaluation of Reinforced and Green Bioplastic from Carrageenan Seaweed with Nanocellulose
Fatmawati Adam Nor Amira Othman Nur Hidayah Mat Yasin Chin Kui Cheng Nurul Aini Mohd Azman
Vol. 23, No. 10, pp. 2885-2896, Oct. 2022
10.1007/s12221-022-4006-6
Vol. 23, No. 10, pp. 2885-2896, Oct. 2022
10.1007/s12221-022-4006-6
An Investigation on the Effect of Humidity on the Mechanical Properties of Composite Materials Based on Polymethyl Methacrylate Polymer Optical Fibers (POFs)
Mohammed Belkheir Mohamed Alami Allel Mokaddem Bendouma Doumi Ahmed Boutaous
Vol. 23, No. 10, pp. 2897-2906, Oct. 2022
10.1007/s12221-022-4164-6
Vol. 23, No. 10, pp. 2897-2906, Oct. 2022
10.1007/s12221-022-4164-6
The Simultaneous Effect of Microcapsules and Silica Nanoparticles on the Mechanical-healing Properties of Glass Fibers-Epoxy Smart Composites
Hossein Ebrahimnezhad-Khaljiri Reza Eslami-Farsani Sadegh Mirzamohammadi Shabnam Arbab Chirani
Vol. 23, No. 10, pp. 2907-2915, Oct. 2022
10.1007/s12221-022-4365-z
Vol. 23, No. 10, pp. 2907-2915, Oct. 2022
10.1007/s12221-022-4365-z
Experimental Analysis and Mechanical Properties of Fly-ash Loaded E-Glass Fiber Reinforced IPN (Vinylester/polyurethane) Composite
R. Ganesamoorthy G. Suresh K.R. Padmavathi J. Rajaparthiban R. Vezhavendhan
G. Bharathiraja
Vol. 23, No. 10, pp. 2916-2926, Oct. 2022
10.1007/s12221-022-4194-0
G. Bharathiraja
Vol. 23, No. 10, pp. 2916-2926, Oct. 2022
10.1007/s12221-022-4194-0
Epoxy/Nanosilica Organic-inorganic Hybrid Materials-Effect of Functional Group of POSS
Hou-Hsein Chu Yu-Ling Chen Bei-Huw Shen Kuang Sein Chuang
Vol. 23, No. 10, pp. 2927-2936, Oct. 2022
10.1007/s12221-022-4016-4
Vol. 23, No. 10, pp. 2927-2936, Oct. 2022
10.1007/s12221-022-4016-4
Preparation and Performance Study of Nano-Ti-MWCNT Hybrid Filler Reinforced Epoxy Resin Composite Coating
Hui Chai Xinhua Wang Waheed Ur Rehman Xuyun Yang Tao Meng
Renyang He
Vol. 23, No. 10, pp. 2937-2944, Oct. 2022
10.1007/s12221-022-0076-8
Renyang He
Vol. 23, No. 10, pp. 2937-2944, Oct. 2022
10.1007/s12221-022-0076-8
Tensile Properties Prediction of Unidirectional Flax/Polyester Composites: Mathematical Modeling and Experimental Investigation
Sagar Chokshi Vijaykumar Chaudhary Piyush Gohil
Vol. 23, No. 10, pp. 2945-2951, Oct. 2022
10.1007/s12221-022-5160-6
Vol. 23, No. 10, pp. 2945-2951, Oct. 2022
10.1007/s12221-022-5160-6
Damage Characteristics of Cotton Yarn in High-speed Warpknitting Processing from Finite Element Simulation
Dexuan Mei Fenglin Xia Ailan Wan Gaoming Jiang Pibo Ma
Vol. 23, No. 10, pp. 2952-2959, Oct. 2022
10.1007/s12221-022-0188-1
Vol. 23, No. 10, pp. 2952-2959, Oct. 2022
10.1007/s12221-022-0188-1
Windmill Palm Waste Fiber Used as a Sustainable Nonwoven Mat with Acoustic Properties
Changjie Chen Yan Liu Zhong Wang Guohe Wang Xinhou Wang
Vol. 23, No. 10, pp. 2960-2969, Oct. 2022
10.1007/s12221-022-4346-2
Vol. 23, No. 10, pp. 2960-2969, Oct. 2022
10.1007/s12221-022-4346-2
Encapsulation of Frankincense Essential Oil by Microfluidic and Bulk Approaches: A Comparative Study
Pouria Taherian Mohammad Sadegh Nourbakhsh Ali Abouei Mehrizi Mohadeseh Hashemi
Vol. 23, No. 10, pp. 2970-2980, Oct. 2022
10.1007/s12221-022-4937-y
Vol. 23, No. 10, pp. 2970-2980, Oct. 2022
10.1007/s12221-022-4937-y